surge protective device tester SPD888


SPD 888 portable surge protectiv device tester is designed for outdoor testing of Surge Protective Devices (SPDs). Users can determine the status of these components according to the tester readings.

The tester can measure both type of main component inside SPDs, including:

a)Voltage Limiting Type (MOV, TVS, Zener Diode ) The SPD tester injects a current of 1mA into the component and measure the Nominal Voltage. Then, the tester can use this voltage to find out the leakage current of the component.

b)Voltage Switching Type (Gas Discharge Tube, Solid Discharge Tube, Spark Gap) The SPD tester injects a increasing voltage(10V/ms) into the component and measure the Break Down Voltage of the component.
1. General info of SPD888.

2. Technical parameters of SPD888

3. Saftety parameters of SPD888


10 years of experience, is worthy of trust!
FATECH sincerely look forward to providing customers with various series lightning protection products, quality and professional lightning protection system solutions.
  • AddressBuilding D7, Guangdong New Light Production Base, Luocun, Shishan Town, Foshan City, Guangdong Province, China.

  • Tel+86-757-86718031 (Tel)

    +86-757-83557686 (Fax)

© Copyright 2015 Fatech Electronic Limited All Rights Reserved.