Loading Images

Lightning Rod FLR-03

Item No: FLR-03/3
- Leader duvalmessien type discharge lightning rods, used for all kinds of buildings direct lighting protection.
- Under same height conditions, the protection area is larger than ordinary lightning rods.
- Adopt advanced technology, and material, with excellent acid-proof, corrosion-proof effect.
- With strong wind bearing ability.
- Rod part is made from special material, with stronger air termination withstand capacity.
- Simple construction, convenient installation.

Product Description

Lightning rod’s protection zone should be calculated according to standard stipulated rolling sphere method. If the lightning conductor does not meet the requirement, it can adopt special rail or tower to increase the height; if the protection area is wide, it can consider to using several lightning conductors to cover protection area.
1.Electrical and Dimension of lightning conductor FLR-03/3

Operating temperature
Relative humidity
Operating environment
Height (L)
Max. Diameter of the rod (M)
Diameter of Flange (T)
Thickness of Flange
Fixup orifice of Flange
φ10(mm)x 4
Housing material
Stainless steel
Max. impulse current Iimp
300 kA
wind bearing
No. of main rod

2.Points for attention
- when you install the lightning rods, every parts should be connected tight.
- After installation, if there is damage in connection parts or metal parts, it needs to arrange rust-proof treatment.
- Lightning conductors should be grounding through down-conductors.
- It needs to check the lightning rods all parts’ connection conditions, grounding resistance before rain season every year.