80kA 2 poles power surge arrester

FV40C/2-xxx S

-Class II / Type 2 power surge arrester.
-Consisting of a base part and 2 MOV plug-in protection modules.
-For using in the lightning protection zones concept at boundary 1-2.
-The core parts are metal oxide vristor components with high discharge capacity.
-Low residual voltage and quick response
-Reliable control thanks to Thermo Dynamic Control disconnector.
-Without remote signaling contact for control device.
-Fault indication via red mark in the inspection window.
-Protection mode: L-PE, N-PE.

1.Coding system


2.Dimension and circuit of power surge arrester FV40C/2-xxx S


3.Electrical parameters of power surge arrester FV40C/2-xxx S
Model No. FV40C/2-150S FV40C/2-275S FV40C/2-320S FV40C/2-385S FV40C/2-440S
Rated Voltage UN VAC 110/220 230/400 230/400 230/400 230/400
Max. continuous. operating voltage UC VAC 150 275 320 385 440
Nominal discharge current(8/20μs) In kA 40 40 40 40 40
Max. discharge current (8/20μs) Imax kA 80 80 80 80 80
Voltage protection level (at In) Up kV ≤1.0 ≤1.7 ≤2.0 ≤2.5 ≤2.7
Response time tA ns <25 <25 <25 <25 <25
Recommended back-up fuse A 125 125 125 125 125
Protection mode L-PE, N-PE
I/O Connections By screw terminal:10-35mm2; By connection bus
Mounting Symmetrical rail(EN50022/DIN46277-3)
Operation temperature range -40℃~+85℃
Degree of protection IP20
Housing material UL94V0
Disconnection indicator Mechanical indicator (Green: OK, Red: Replace)
Remote control contact Optional

Inquiry

10 years of experience, is worthy of trust!
FATECH sincerely look forward to providing customers with various series lightning protection products, quality and professional lightning protection system solutions.
© Copyright 2017 Fatech Electronic CO., LTD. All Rights Reserved.