3 phase type 1 surge protectve device(MOV) 25kA

FV25B/3+NPE-275 S

-Class I / Type 1 surge protective device 3 phase.
-Consisting of a base part and2 MOV pluggable modules.
-For using in the lightning protection zones concept at boundary 1.
-The core parts are metal oxide vristor components with high discharge capacity.
-Low residual voltage and quick response
-Reliable control thanks to Thermo Dynamic Control disconnector.
-With remote signaling contact for control device.
-Fault indication via red mark in the inspection window.
-Protection mode: L1, L2, L3-N, N-PE.
1.Coding system




2.Dimension and circuit of type1 surge protective device FV25B/3+NPE-275S





3.Electrical parameters of type1 surge protective device FV25B/3+NPE-275S

Test class according to IEC61643-1:2005
I
Type of Network
TT
Nominal voltage
UN
230V/50(60)Hz
Rated Voltage (Max. Cont. Operating Voltage)
Uc
275VAC
Impulse discharge current (10/350μs) L-N
Iimp
25kA
Impulse discharge current (10/350μs) N-PE
100kA
Nominal discharge current (8/20μs)
In
50kA
Voltage protective level
Up
1.8kV
Isolation resistance
Risol
>102
Response time
tA
25ns
Recommended back-up fuse
160A
I/O Connections
By screw terminal:10-35mm2
By connection bus
Mounting
Symmetrical rail (EN50022/DIN46277-3)
Operation temperature range
-40~+85℃
Degree of protection
IP20
Housing material
UL94V0
Disconnection indicator
Mechanical indicator
Remote control contact
Yes
Color
Gray

4.Installation of type1 surge protective device FV25B/3+NPE-275S



Inquiry

10 years of experience, is worthy of trust!
FATECH sincerely look forward to providing customers with various series lightning protection products, quality and professional lightning protection system solutions.
© Copyright 2017 Fatech Electronic CO., LTD. All Rights Reserved.